||1. K. H. Kim, K. F. Eman and S. M. Wu, “Analysis Alignment Errors in a Llaser-Based in-Process Cylindricity Measurement System,” Transactions of the ASME Journal of Engineering for Industry, Vol. 109, pp.321-329, 1987.|
2. J. Ni, and S. M. Wu, “An on-line Measurement Technique for Machine Volumetrics Error Compensation,” Transactions of the ASME Journal of Engineering for Industry, Vol. 115, pp.85-92, 1993.
3. K. Lau, R. J. Hocken and W. C. Haight, “Automatic Laser Tracking Interferometer System for Robot Mmetrology,” Precision Engineering, Vol. 8, No. 1, pp.3-8, 1986.
4. E. Hecht, Optics, 3rd Edition, Addison-Wesley Publishing Company. 1998.
5. M. Laikin, Lens Design, Second Edition, New York, Marcel Dekker, Inc. 1995.
6. H. I. Christensen, “A Low-Cost Robot Camera Head,” Int. J. Pattern Recognit. Artif. Intell., vol. 7,no. 1, pp.69-87, 1993.
7. R. Y. Tsai, “A Versatile Camera Calibration Technique for High-accuracy 3D Machine Vision Metrology Using Off-the-shelf TV Cameras and Lenses,” IEEE Journal of Robotics and Automation, Vol. RA-3, No. 4, pp.323-344, 1987.
8. J. D. Foley, A. V. Dam, S. K. Feiner and J. F. Hughes, Computer Graphics, Principles and Practices, 2nd Edition, Addision-Wesley Publishing Company 1981.
9. R. P. Paul, Robot Manipulators-Mathematics, Programming and Control, MIT press, Cambridge, Mass., 1982.
10. C. H. Wu, “Robot Accuracy Analysis Based on Kinematics,” IEEE Journal of Robotics and Automation, Vol. RA-2/3, pp.171-179, 1986.
11. J. Denavit and R. S. Hartenberg, “A Kinematic Notation for Lower Pair Mechanisms Based on Matrices,” Transactions of the ASME Journal of applied mechanics, Vol. 77, pp.215-221, 1955.
12. J. J. Uicker, “On the Dynamic Analysis of Spatial Linkages Using 4x4 Matrices,” Dissertation for Doctor of Philosophy, Northwestern University, Evanston, ILL., Aug. 1965.
13. W. J. Smith, Modern Optical Engineering, Third Edition, SPIE Press. McGRAW-HILL, 2000.
14. M. Born and E. Wolf, Principles of Optics, Pergamon, New York, 1985.
15. C. Reid, “Performance Characteristics of Touch Trigger Probes,” Quality Today, Buyers Guide, pp.152-154, 1995.
16. K. H. Goh, N. Phillips and R. Bell, “The Applicability of a Laser Triangulation Probe to Non-contacting Inspection,” International Journal of Production Research, Vol. 24, No. 6, pp.1331-1348, 1986.
17. D. Blackshaw, “The Pursuit of Quality Through Calibration,” Quality Today, Jan. 1987.
18. J. C. Lu, N. A. Duffie and J. G. Bollinger, “Two Dimensional Tracing and Measurement Using Touch Trigger Probes,” Annals of the CIRP, Vol. 31, No. 1, pp.415-419, 1982.
19. S. Kawabe, et al., “Generation of NC Commands for Sculptured Surface Machining from 3-coordinate Measuring Data,” Annals of the CIRP, Vol. 29, No. 1, 1980.
20. W. R. Devries and Cheng-Jih Li, “Algorithm to Deconvolve Stylus Geometry from Surface Profile Measurement,” Transactions of the ASME Journal of Engineering for Industry, Vol. 107, pp.167-174, 1985.
21. B. Nowicki, “Surface Roughness and Measurement with New Contact Methods,” International Journal of Machine Tool Design and Research, Vol. 26, No. 1, pp.61-68, 1986.
22. D. J. Whitehouse , “Theoretical Analysis of Stylus Integration ,“ Annals of the CIRP, Vol. 23, No. 1, pp.181-182, 1974.
23. D. J. Whitehouse, “Comparison Between Stylus and Optical Methods for Measuring Surfaces,” Annals of the CIRP, Vol. 37, No. 2, pp.649-650, 1988.
24. V. Radhakrishnan, “Effect of Stylus Radius on the Roughness Value Measured with Tracing Stylus Instrument,” Wear, Vol. 16, pp.325-335, 1970.
25. I. Elewa and M. M. Koura, “Importance of Checking the Stylus Radius in the Measurement of Surface Roughness,” Wear, Vol. 109, pp.401-410, 1986.
26. H. Theodore , R. J. Hocken, “CAD-directed Inspection,” Annals of the CIRP, Vol. 33, No. 1, 1984.
27. L. Villner and L. Jansson, “Surface Roughness of Casting and Development of Surface Comparator,” Annals of the CIRP, Vol.13, No.1, pp.51-63, 1965.
28. D. A. Dornfeld and S. M. Wu, “An Investigation of Ground Wood Surface as Related to Pulp and Stone Characteristics,” Wear, Vol. 42, pp.163-175, 1977.
29. A. Bengtsson and A. Ronnberg, “Wide Range Three-dimensional Roughness Measuring System,” Precision Engineering, Vol. 6, No. 3, pp.141-147, 1984.
30. T. R. Thomas, “Comparison of Scanning Electron Microscopy and Stylus Raster Measurement of Wear,” Wear, Vol. 109, pp.343-350, 1986.
31. T. Nakamura, “On Deformation of Surface Roughness Curves Caused by Finite Radius of Stylus and Tilting of Stylus Holder Arm”, JSPE, Vol.1, No.4, pp.240-248, 1966.
32. J. C. Wyant , C. L. Koliopoulos , B. Bhushan and D. Basila, “Development of a Three-dimensional Non-contact Digital Optical Profiler,” Transactions of the ASME Journal of Tribology, Vol. 108, January, pp.1-8, 1986.
33. N. Tsabourakis, et al., “Development of a Profile Gauging Sensor,” International Journal of AMT, Vol. 3, No. 2, 1988.
34. Q. Yang and C. Butler, “A 3-D Non-contact Trigger Probe for Coordinate Measuring Machines,” Measurement, Vol.17, No.1, pp.39-44, 1996.
35. M. Shiraishi, “In-process Measurement of Surface Roughness in Turning by Laser Beams,” Transactions of the ASME Journal of Engineering for Industry, May, Vol. 103, pp.203-209, 1981.
36. D. A. Dornfeld , S. M. Yoo and R. L. Lemaster, “Analysis and Modeling of Laser Measurement System Performance for Wood Surface,” Transactions of the ASME Journal of Engineering for Industry, Vol. 112, pp.69-77, 1990.
37. P. D. Lin, “Analysis and Modeling of Optical Elements and Systems,” Transactions of the ASME Journal of Engineering for Industry, Vol.116, February, pp.101-107, 1994.
38. 范光照,章明,姚宏宗,許智欽,逆向工程技術及應用,高立圖書,初版, 1999.
39. B. M. Shaw and J. Deklenik, “A Light Projection Technique for Studying Surface Topology,” Annals of the CIRP, Vol. 12, No. 2, pp.93-97, 1963.
40. T. G. Rochhow and E. G. Rochow, “An Introduction to Microscopy by Means of Light, Electron, X-rays or Ultrasound,” Plenum New York, 1979.
41. H. Sato and M. O-Hori, “Surface Roughness Measurement Using Scanning Electron Microscope with Digital Processing,” Transactions of the ASME Journal of Engineering for Industry, Vol. 109, May, pp.106-111, 1987.
42. M. Chang and K. H. Lin, “Non-contact Scanning Measurement Utilizing a Space Mapping Method,” Optics and Lasers in Engineering, Vol. 30, pp.503-512, 1999.
43. Wen-Chih Tai and M. Chang, “360-deg Profile Non-contact Measurement Using a Neural Network,” Optical Engineering, Vol. 34, No. 12, pp.3572-3576, 1995.
44、Wen-Chih Tai and M. Chang, “Non-contact Profilometric Measurement of Large-form Parts,” Optical Engineering, Vol. 35, No. 9, pp.2730-2735, 1996.
45. H. H. Loh and M. S. Lu, “Printed Circuit Board Inspection Using Image Analysis,” IEEE Transactions on Industry Applications, Vol. 35, No. 2, pp.426-432, 1999.
46. A. J. Jeffrey, C. K. Richard and K. C. Steven, “Three Dimensional Inspection Using Multistripe Structured light,” Optical Engineering, Vol. 24, No. 6, pp.966-974, 1985.
47. A. Dose and R. Landwehr, “Zur Bestimmung Der Isopachen in Der Spannungspotik,” Naturwissenschaften 36, pp.342-346, 1949.
48. R. Weller and B. M. Shepard, “Displacement Measurements by Mechanical Interferometry,” Proceeding of. SESA, Vol.6, No.1, pp.35-38, 1948.
49. H. Takasaki, “Moire’ Topography,” Applied Optics, Vol. 12, No. 4, pp. 845-851, April, 1973.
50. J. Marasco, “Used of Curved Grating in Shadow Moire’,” Experiment Mechanics, Vol.15, No.12, pp.464-470, 1975.
51. A. S. Voloshin, C. P. Burger and R. E. Rowlands, “Composites Analysis by Fractional Moire’ Fringe System,” J. Comp. Mat., Vol. 19, pp.513-524, 1985.
52. K. Creath, “Phase-shifting Speckle Interferometry,” Applied Optics, Vol. 24, No. 18, September, 1985.
53. J. L. Sullivan, “Phase-stepped Fractional Moire’,” Experiment Mechanics, pp. 373-381, 1991.
54. J. E. Liao and A. S. Voloshin, “Enhancement of the Shadow-Moire’ Method Through Digital Image Processing,” Experiment Mechanics, pp.59-63, September 15, 1992.
55. 章明、戴文智，“以掃描疊紋法作三次元輪廓精密量測,” 機械月刊，第十九卷第一期，pp.93-100, 1993.
56. D. B. Ballard and C. M. Brown, Computer Vision, Printice-Hall Inc., 1982.
57. K. B. Atkinson, Close range photogrammetry and machine vision, Whittles Publishing, 1996.
58. P. Fricker, R. Sandau and A. S. Walker, “Airborne Digital Sensors-a New Approach,” Joint Workshop of ISPRS Working Groups 1/1, 1/3 and Ⅳ/4: Sensors and Mapping from Space, September, 1999.
59. B. Ameri and D. Fritsch, “Automatic 3D Building Reconstruction Using Plane-roof Structures,” American Society for Photogrammetry and Remote Sensing, 2000.
60. S. T. Barnard and M. A. Fischier, “Computational Stereo,” Comput. Surveys, Vol.14, No.4, pp.553-572, 1982.
61. U. R. Dhond and J. K. Aggarwal, “Structure from Stereo- a Review,” IEEE Transactions on Systems, Man, And Cybernetics, Vol.19, No.6, pp.1489-1510, 1989.
62. M. Yachida, Y. Kitamura and M. Kimachi, “Trinocular Vision: New Approach for Correspondence Problem,” Proceeding 8th International Conference on Pattern Recognition, Paris, France, Oct. 27-31, pp. 1041-1044, 1986.
63. Y. Ohta, M. Watanabe and K. Ikeda, “Improving Depth Map by Trinocular Stereo,” Proceeding 8th International Conference on Pattern Recognition, Paris, France, Oct. 27-31, pp.519-521, 1986.
64. M. Peitikäinen and D. Harwood, “Depth from Three Camera Stereo,” Proceeding IEEE CS Conference on Pattern Recognition, Miami Beach, Fl., June 22-26, pp.2-8, 1986.
65. N. Ayache and F. Lustman, “Fast and Reliable Passive Trinocular Stereo Vision,” Proceeding 1st International Conference on Computer Vision, June 8-11, pp.422-427, 1987.
66. C. Hansen, N. Ayache and F. Lustman, “High-speed Trinocular Stereo for Mobile-Robot Navigation,” Proc. NATO Adv. Res. Workshop Highly Redundant Sensor Systems, ⅡChiocco, Italy, May 16-20, 1988.
67. J. Weng , P. Cohen and M. Heraiou, “Camera Calibration with Distortion Models and Accuracy Evaluation,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 14, No. 10, pp.965-980, 1992.
68. G. Q. Wei and S. D. Ma, “Implicit and Explicit Calibration: Theory and Experiments,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 16, No. 5, pp.469-480, 1994.
69. W. Zhao and N. Nandhakumar, “Relative Influence of Camera Alignment Errors on 3D Stereoscopic Measurement,” Second Asian Conference on Computer Vision, Singapore, 5-8 December, 1995.
70. W. Zhao and N. Nandhakumar, “Effects of Camera Alignment Errors on Stereoscopic Depth Estimates,” Journal of Pattern Recognition, pp.2115-2126, 1996.
71. D. B. Steven and S. H. Thomas, “Error Analysis in Stereo Determination of 3-D Point Positions,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. PAMI-9, No. 6, November, pp.752-765, 1987.
72. R. H. Edwin and C. W. Richard, “Rectifying Structure Matching Errors,” Second Asian Conference on Computer Vision, Singapore, December, pp.353-362, 1995.
73. R. S. Ramakrishna and B. Vaidyanathan, “Error Analysis in Stereo Vision,” Third Asian Conference on Computer Vision, Hong Kong, China, January, pp. 297-304, 1998.
74. D. Wenyi, L. Naiguang, Z. Jingcheng, G. Shuyi and Q. Xuguang, “A Stereo Vision System for Measurement of 3-D Object,” SPIE, Vol. 3588, pp.248-252, 1998.
75. J. N. Brecker, “A Capacitance-based Surface Texture Measuring System,” Annals of the CIRP, Vol. 25, No. 1, pp.375-377, 1977.
76. M. Graneck and H. L. Wunsch, “Application of Pneumatic Gauging to the Measurement of Surface Finish,” Machinery, Vol. 18, pp.701-707, 1952.
77. J. C. Wanger, “Surface Effects in Pneumatic Gauging,” International Journal of Machine Tool Design and Research, Vol. 7, pp.1-14, 1967.
78. V. Radhakrishnan and V. Sagar, “Surface Roughness Assessment by Means of Pneumatic Measurement,” Proceeding of the Machine Tool Design & Research Conference, Madras, pp.487-494, 1970.
79. L. H. Tanner, “A Pneumatic Wheatstone Bridge for Surface Roughness Measurement,” Journal of Physic E, Vol. 12, pp. 957-960, 1979.
80. L. H. Tanner, “A Self Balancing Wheatstone Bridge for Surface Roughness Measurement,” Wear, Vol. 83, pp.37-47, 1982.
81. L. H. Tanner, “An Improved Pneumatic Wheatstone Bridge for Surface Roughness Measurement,” Journal of Physic E, Vol. 13, pp.593-594, 1980.
82. S. Wang and K. B. Hsu, “The Study of Pneumatic Gauge to Surface Roughness Measurement,” Journal of the Chinese Society of Mechanical Engineers, Vol. 8, No. 5,pp.347-363, 1987.
83. I. Sherringtor and E. H. Smith, “Modern Measurement Techniques in Surface Metrology: PartⅠ: Stylus Instruments, Electron Microscopy and Non-optical Comparators,” Wear, Vol. 125, pp. 271-288, 1988.
84. T. Bonac, “Wood roughness volume and depth estimated from pneumatic surface measurement , ” Wood Science, Vol. 11, No. 4, pp. 227-232, 1979.
85. H. Sato and M. Ohori, “Surface Roughness Measurement by Scanning Electron Microscope,” Annals of the CIRP, Vol. 31, No. 1, pp.457-462, 1982.
86. Y. Fainman, E. Lenzs and J. Shamir, “Optical Profilometer : A New Method for High Sensitivity and Wide Dynamic Range,” Applied Optics , Vol.21, No.17, pp.3200-3208, 1982.
87. A. G. Jansson, J. M. Rourke and A. C. Bell, “High-speed Surface Roughness Measurement,” Transactions of the ASME Journal of Engineering for Industry, Vol. 106, No. 1, pp.34-39, 1984.
88. R. A. Sprague, “Surface Roughness Measurement Using White Light Speckle,” Applied Optics, Vol. 11, No. 12, pp.2811-2816, 1972.
89. J. M. Bennett, “Measurement of the RMS Roughness, Autocovariance Function and Other Statistical Properties of Optical Surfaces Using a FECO Scanning Interferometer,” Applied Optics, Vol.15, No. 11, pp.2705-2721, 1976.
90. J. Y. Yen, C. S. Jeng and K. C. Fan, “Servo Design for 3D Laser Tracking Measurement System,” Transactions of the ASME Journal of Dynamic System, Measurement and Control, Vol. 118, pp. 476-481, 1996.
91. Pamphlet, on-Target Tracking, “Chesapeake Laser System Inc.,” Three and Five Axis Laser Tracking System, US-Patent 4, 714, 339, Dec. 22, 1987.
92. P. Haschberger, O. Mayer, V. Tank and H. Dietl, “Ray Tracing Through an Eccentrically Rotating Reflector Used for Path-length Alteration in a New Michelson Interferometer,” Journal of the Optical Society of America, Vol. 8, No. 12, pp.1991-2000, 1991.
93. M. Atsushi and S. Nobuo, “Design of a Four-element, Hollow-cube Corner Retroreflector for Satellities by Use of a Genetic Algorithm,” Applied Optics, Vol. 37, No. 3/20, pp.438-442, 1998.
94. N. Shojiro and K. Jun, “Retroreflector Using Gradient-index Rods,” Applied Optics, Vol. 30, No. 7, pp. 815-822, 1991.
95. L. Z. James, “Cube Corner Retroreflector Test and Analysis,” Applied Optics, Vol. 15, No. 2, pp.445-452, 1976.
96. Leica Smart 310 Laser Tracker Owner’s Manual, Leica Geosystems Ag, Heerbrugg, Switzerland, 1987.
97. D. F. Feder, “Differentiation of Ray-tracing Equations with respect to Construction Parameters of Rotationally Symmetric Optics,” Journal of the Optical Society of America, Vol. 58, No. 11, pp. 1494-1505, 1968.
98. D. S. Bryan and G. W. Forbes, “Differential Ray Tracing in Inhomogeneous Media,” Journal of the Optical Society of America A, Vol.14, No.10, pp. 2824-2836, 1997.
99. W. T. Welford, Aberrations of the symmetrical Optical System, Academic Press, New York, 1974.
100. Reinhard Klette, Karsten Schlüns and Andreas Koschan, Computer Vision: Three-Dimensional Data from Images, Springer-Verlag Singapore, Pte. Ltd., 1998.
101. K. V. Asari, S. Kumar and D. Radhakrishnan, “A New Approach for Nonlinear Distortion Correction in Endoscopic Images Based on Least Squares Estimations,” IEEE Transactions on Medical Imaging, Vol. 18, No. 4, APRIL, pp.345-354, 1999.
102. S. K. Fu, R. C. Gonzalez and C. S. G. lee, Robotics: control, sensing, vision and intelligence, McGraw-Hill, New York, 1987.
103. S. D. Ma, “A Self-calibration Technique for Active Vision Systems,” IEEE Transactions on Robotics and Automation, Vol. 12, No. 1, pp.114-120, 1996.
104、S. W. Shin, Y. P. Hung and W. S. Lin, ”Calibration of an Active Binocular Head,” IEEE Transactions on System, Man, and Cybernetics, Vol. 28, No. 4, pp.426-442, 1998.
105. J. L. Mundy and A. Zisserman, Geometric Invariance in Computer Vision, MIT Press, Cambridge, 1992.
106. R. C. Gonzalez and R. E. Woods, Digital Image Processing, Addison-Wesley Publishing Company, 1992.
107. E. O. Doebelin, Measurement Systems; Application and Design, McGraw-Hill Publishing Company. P.69, 1990.